GE Aerospace is a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft.
Vacancies
| Job Positions | JD | Working hours/ Location | Screening Criteria |
| Trainee Component Repair Technician (NDT) | Role Overview: • Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts • Correct interpretation and understand the inspection operation sheets and work instruction • Organize, sort and prepare the parts for NDT inspection • Load, unload, and operate either the real-time XR, UT or auto FPI line effectively • Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets • Ensure the equipment operation readiness always • Assist the Engineer for any inspection evaluation and reporting • Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents • Prepare and clean parts before and/or after inspection • Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen • Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable. Required Qualifications: • Full Time Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering from local ITE • Full Time Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics from local Polytechnics • Any relevant Full Time Nitec / Higher Nitec / Technical Diploma / Polytechnic Diploma or relevant engineering disciplines from local ITE or Polytechnics • Able to read & write English at a professional working proficiency level • Able to work rotating shifts • Willing to accept a 1-year bond after the program Preferred Qualifications: • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must have completed their full-time Diploma, Nitec, or Higher Nitec program between the years 2023 and 2026. • Candidates must hold qualifications in engineering-related courses. • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. |
| Component Repair Technician (V&D Inspector) | Role Overview: • Ensure quality of parts meet specification requirements • Ensure proper work clearance, correctness and completeness • Prevent non-conforming parts from proceeding to the next work station • Provide support to Manufacturing Engineers and Quality System Engineers for evaluations, audits related activities • Collect data, feedback on the quality of parts inspected to the Manufacturing Engineers and Quality System Engineers • Perform visual & dimensional inspections, and set area management of the parts • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • QC experience in repair of aircraft engine components • Ability to use precision measuring instruments Required Qualifications: • Diploma in Mechanical/Precision/Manufacturing Engineering • Able to read and understand the manufacturing operation sheets and standard operation procedures in English. Preferred Qualifications: • Preferably with CAAS Air Legislation Paper L11 or L12 or C14 • Knowledge of flaws and defects • Ability to comprehend blue print • Computer literacy in Microsoft Office • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must hold qualifications in engineering-related courses. • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. |
| Component Repair Technician (NDT) | Role Overview: • Perform specific calibrations, NDT and specific evaluations for acceptance or rejection of parts • Correct interpretation and understand the inspection operation sheets and work instruction • Organize, sort and prepare the parts for NDT inspection • Load, unload and operate either the real-time XR, UT or auto FPI line effectively • Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets • Ensure the equipment operation readiness always • Assist the Engineer for any inspection evaluation and reporting • Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents • Prepare and clean parts before and/or after inspection. • Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • Prior experience in NDT Required Qualifications: • Minimum GCE ‘O’ level and/or with 5 years’ experience in Quality Inspection; or • Minimum GCE ‘O’ level and/or with 2 years’ of NDT experience; or • Diploma holders in Aircraft Maintenance/Aerospace Engineering; or • Preferably CAAS Approval in NDT certification • Able to read and understand the manufacturing operation sheets and standard operation procedures in English Preferred Qualifications: • Knowledge in NDT per NAS 410 standard in any of the following methods: NDT –PT/ NDT – X-Ray/ NDT – UT /NDT – ECI /NDT – MPI • Knowledge in NDT per ASNT Level I, II or III in any of the following methods: NDT – X-Ray/ NDT – UT/ NDT – ECI/ NDT – MPI • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must hold qualifications in engineering-related courses. • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. |
| Component Repair Technician (Machining) | Role Overview: • Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications • May follow a particular product through the machine shop using a variety of machine tools to complete the finished product • Use all types of standard and special gauges, various hand tools • Maintain pertinent records; work according to technical drawings and instructions • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • Minimum GCE 'O' level with relevant experience in Machining, CNC Machining. Required Qualifications: • Minimum GCE ‘O’ level with 3 years of relevant experience; or • Preferably NITEC/Higher NITEC in Mechanical/Precision Engineering or equivalent; or • Diploma in Mechanical/Precision/Manufacturing Engineering • Able to read and understand the manufacturing operation sheets and standard operation procedures in English Preferred Qualifications: • Good mechanical aptitude. • Knowledge in CNC programming • Ability to comprehend technical drawings/instructions • Ability to use measuring instruments • Previously worked in a manufacturing environment • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. • Candidates with relevant experience prefered. |
| Component Repair Technician (Welding) | Role Overview: • Apply necessary gas back-up and chilled bars as required to perform efficient weld repair • Perform manual and laser weld of all products with different weld configurations • Identify and replace basic fixture/tooling due to wear and tear • Simple refining of welding parameters • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • Minimum GCE 'O' level with 3 years of relevant experience in TIG Welding Required Qualifications: • Minimum GCE ‘O’ level with 3 years of relevant experience • Preferably NITEC/Higher NITEC in welding • Relevant TIG certificates; or • Preferably CAAS approval in TIG Welding/General Welding or equivalent • Able to read and understand the manufacturing operation sheets and standard operation procedures in English Preferred Qualifications: • Knowledge of measuring instrument, TIG Welding • Must be able to fully comprehend process parameters and consistently produce good quality parts • Ability to read & understand technical drawings/instructions • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. • Candidates with relevant experience prefered. |
| Component Repair Technician (Airfoil) | Role Overview: • Perform hand blending & polishing operations, followed by self-inspection of blended parts to the tolerance and specifications • Read and correct interpretation of Operation Sheets and perform to the expected requirements • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • minimum GCE 'O' level with 3 years of relevant experience, capable of performing hand blending and polishing operations, self-inspection, interpreting operation sheets accurately, and conducting scheduled maintenance and housekeeping tasks. Required Qualifications: • Minimum GCE ‘O’ level with 3 years of relevant experience; or • Preferably NITEC/Higher NITEC in Mechanical/Precision Engineering or equivalent; or • Diploma in Mechanical/Precision/Manufacturing Engineering • Able to read and understand the manufacturing operation sheets and standard operation procedures in English Preferred Qualifications: • Good mechanical aptitude. • Knowledge in CNC programming • Ability to comprehend technical drawings/instructions • Ability to use measuring instruments • Previously worked in a manufacturing environment • A team player | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. |
| Component Repair Technician (Automation & Robotics) | Role Overview: • Installation and commissioning of Automatic & Robotics machines in GE Aerospace facilities. • Support Engineers to troubleshoot, investigate and implement continuous improvement initiatives to drive Safety, Quality Delivery and Cost (SQDC). • Write and modify FANUC robot and PC programming. • Setup and teach new/additional products/stages in shops. • Troubleshoot mechanical and electrical operational machines in shops. • Data collections/analysis of machine performance in shops. • Conduct basic users training in shop. • Participate in Kaizen/improvement projects The Ideal Candidate: • The ideal candidate has proven 2-3 years hands-on experience maintaining and troubleshooting (mechanical and electrical) robotics or/and automated equipment in high volume production environment. Required Qualifications: • Diploma in Mechatronics or related discipline. • Minimum Higher NITEC holders with 2-3 years relevant work experience Preferred Qualifications: • Must be able to work hands-on and work along with all levels • Strong problem-solving skills • Responsible, accountability and dependable of good work • Team player; able to work across functions • Able to perform work under relatively stressful environment • Knowledge in LEAN Manufacturing is advantages • Experience & knowledge in MRO Component Repair process would be an advantage. • Hands-on experience maintaining and troubleshooting (mechanical and electrical) robotics or/and automated equipment in high volume production environment. • Ability to write/interpret Fanuc/ABB robotics programming or/and PLC programming • Good basic functional knowledge of sensors, motors, pneumatic and electrical components commonly used in automated equipment • Good understanding of MS-Office application especially MS-Excel | • 5-day work week • Permanent 1st shift: 7.30am – 4.20pm • 23 Loyang Way / 62 Loyang Way | • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. • Candidates with relevant working experiences, min 1 year, prefered. |
| Machine Maintenance Technician | Role Overview: • Diagnose, troubleshooting, Servicing, repair and of maintenance of furnaces and plant equipment, instruments, microprocessor and measuring facilities • Maintenance of Heaters, Insulation, Sensors, Control Panel, Vacuum Pumps, Cooling Towers, Water Systems etc. • Perform preventive and corrective maintenance, installation, fabrication and calibration (not controlled by QA) of plant equipment and support facilities. • Diagnose, troubleshoot, repair and modify plant equipment, instruments, microprocessor and measuring facilities • Institute judgment to improvise installation or diagnostic methods when original operation manuals or technical literature are not available or inapplicable • Establish and maintain calibration systems to effectively control performance of various instruments and controllers • Maintain documentation where necessary of completed assignments for tractability • Establish stock level requirement for existing and new equipment • Work independently from prints, sketches, technical literature and other instructions. • Provide hands-on training guidance to lower skilled technicians • Exercise extreme caution to protect one-self and co-workers from accidents when working under hazardous conditions such as heights, enclosed compartments, live wires or devices, flammable or explosive atmosphere, suspended heavy machinery, power tools, etc. • Constantly check working environment for compliance with applicable EHS requirements. Thoroughly check out completed jobs before handling over to end user to assure that the facility is electrically and mechanically safe. Ensure that appropriate PPE are used wherever necessary • Adhere to all applicable EHS rules and regulations and employee’s EHS responsibilities as per EHS OP 283.00 • Perform scheduled maintenance & housekeeping tasks The Ideal Candidate: • 2-3 years of experience in machine maintenance and furnaces Required Qualifications: • Minimum Higher NITEC/NTC2 (electrical, electronic, mechanical or mechatronics) with 2 years’ relevant experience or equivalent; or • Preferably ITC or Diploma (electrical, electronic, mechanical or mechatronics); or • Diploma (electrical, electronic, mechanical or mechatronics) • Able to read and understand the manufacturing operation sheets and standard operation procedures in English Preferred Qualifications: • Versatile in electrical, electronic, and mechanical engineering • Forklift license • PC knowledge, hydraulics, pneumatics, welding and workshop skills | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. • Candidates with relevant working experiences, min 1 year, prefered. |
| Inspector (Metallurgy) | Role Overview: • Comply to Safety, Quality, Delivery, Inventory and Productivity of Metallurgical Lab operation • Prepare the sample for mechanical testing such as hardness, tensile strength, and other relevant metrics • Prepare the sample for metallurgical evaluation including sectioning, mounting, polishing, grinding and etching • Operate and maintain Metallurgical Lab equipment and ensure its calibration validity. • Adhere to laboratory procedures during performing of metallurgical lab operation, maintain general laboratory housekeeping (5S) • Perform incoming inspection of controlled material if required • Liaise with external laboratory or supplier related to metallurgical service (Ensure all external metallurgical service quotation, purchase order and certificate be delivered timely) • Good communication skill and able to work with Requestor for metallurgical evaluation and analysis • Flexible with working timing and Willingly to work in rotating shift & weekend The Ideal Candidate: • Knowledge in Aerospace, Material science or Mechanical field with experience in laboratory sample preparation and interpretation of microstructure Required Qualifications: • Minimum GCE ‘O’ level and/or with 3 years of relevant experience. Preferably NITEC/Higher NITEC in Engineering; or Diploma in Engineering Field • Able to read and understand the manufacturing operation sheets and standard operation procedures in English • Strong analytical skills and attention to detail • Candidates with no experience are welcome Preferred Qualifications: • Respect for people: Put safety first, be humble, respectful, be inclusive, critical thinker • Continuous Improvement: Eager to learn, analytical-minded, challenges existing processes, shares critical information, speaks with candor, contributes constructively • Customer Driven: Deliver with focus, quick learner, strategically prioritizes work, strong communicator, decision-maker, collaborative. | • 5-day work week • 1st shift: 7.30am – 4.20pm • 2nd shift: 4pm – 12.50am • Permanent 3rd Shift: 12.30am - 7.50am • Rotation of 1st and 2nd Shift is required • Shift patterns may change due to business needs. • 23 Loyang Way / 62 Loyang Way | • Candidates must hold qualifications in engineering-related courses. • Candidates must be willing to work rotating shifts. • Candidates must be open to working permanent night shifts, if required. • Candidates must be comfortable with the work location at Loyang. • Candidates with relevant experience prefered. |
| Title : | Assessment Centre and Walk In Interview@GE Aerospace |
|---|---|
| Type : | Dedicated Company Job Fair |
| Date : | 04 Dec - 04 Dec 2025 |
| Time : | 12:00 PM - 06:30 PM |
| Participants: | 50 |
| Seats Left: | 40 |